So, You Want to… Paint Your Window Trim (2023)

So, You Want to… Paint Your Window Trim (1)


This content has been brought to you by Hyde Tools. Its facts and opinions are those of

Whether you have just installed a new window or you’re updating your home’s colors, indoors or out,your project will most likely involvepainting window trim. After all, how better to accentuate the new look than with crisp lines and fresh color? Painting the molding aroundthe windows doesn’t have to be a difficult chore. As with most paint jobs, getting a professional look—without making a mess—starts with the right tools and techniques. With a little help from the pros and high-quality products from Hyde Tools and Richard Tools, you can have great-looking window trim in no time.

MATERIALS AND TOOLS Available on Amazon
HYDE Black & Silver 6-in-1 paint scraper (available at
HYDE Caulk Aidremover and applicator (available
Allpurpose degreasing cleanser
Cleanser with mildewcide
Paintable caulk
HYDE 11-½-inch Mini Guide™ Paint Shield & Smoothing Tool (available at
Richard Tools’ Mini Master Touch Series Angular Paintbrush (available at
HYDE 9mm Snap-Off Blade Utility Knife with 30-Degree Blade(available at
HYDE Glass Scraper with 5 Blades Stored in Handle (available at


For both interior and exterior trim, you’ll probablywant to choose a paint with a glossy finish.These paints form a durable finishthat repels dirt and grime better than flat paint,and they’re easier to wipe clean, too.

The specific type of paint needed, however, depends on your trim’s material. Window trim can be made from wood, vinyl, aluminum, or steel,and there’s no singlecoating that works with all. If you start with just any old can of paint, you could risk seeing the resultsof all your hard work flakeoff within the year. Choosing a paint that’scompatible with your type of trimwill help achieve results that last.

So, You Want to… Paint Your Window Trim (2)


  • Wood is the most common material used to trim both interior and exterior windows, and you won’t have any problem finding a good-quality paint. For exterior wood trim, choose a premium exterior gloss paint, either oil or acrylic. For interior wood trim, choose a high-quality latex gloss paint.
  • Medium-Density Fiberboard (MDF) is becoming a popular material for interior window trim because it’s easy to install and resists moisture damage. The same paint used on interior wood (high-quality latex gloss paint) can be used on MDF trim.
  • Vinyl is usually reserved for the exterior of a house and paired with vinyl siding.Its impermeable surface won’t holdstandard paint; those suggestedabove wouldeventually peel off. Instead, look for an exterior gloss paint specifically made for vinyl.
  • Metal trim is also typically found on a home’s exterior and paired with metal siding. Choose an exterior gloss paintlabeled for use on metal. Some of the best metal paints contain rust-resistant chemicals that will help prevent rust from forming on your trim.
  • If your window trim is unfinished, you’ll get the best paint adhesion if you apply primer before painting. Like the paint you choose, the primer should be compatible with the type of trim you’re painting.


If you’re painting interior window trim, just about any time is the right time to start this paint job. There’s less flexibility, however, for scheduling a paint job on exterior trim. Check the weather forecast and choose a day when the temperatures will stay between 50and 80 degrees Fahrenheit. Hotter than that, and the paint can dry too quickly, which can affect the quality of the finish. You’ll also want to pick a daywithout rain or wind. No matter how careful you are,painting on a windy day will lead to unwanted spatter on your home’s siding.

So, You Want to… Paint Your Window Trim (3)



While many ado-it-yourselfer would like to get straight to the main event—the painting—the finished project will be only as good as your prep job. Be sure to taketime to prepare the surface to accept the new paint.

  1. First, scrape away any peeling paint.Go over the old window trim thoroughly with a paint scraper like Hyde Tools’ Black & Silver 6-in-1 Paint Scraper, because any remaining loose paint will cause the new paint to peel off.Of course, if you’re painting new or unfinished trim, you can skip this step—it’s only necessary fortrim(of any type of material) that haspeeling paint.
  2. Remove hardened caulking.On older windows, the semisolid sealant that fills the seams between trim boards will,over time, become brittle and pull away from the trim. (If you’ve just installed your window, you won’t have this trouble; skip ahead!) You can try scraping it out with the edge of the 6-in-1 paint scraper or a metal putty knife, but you’ll have better luck withthe Caulk Aidfrom Hyde Tools. Made from high-impact plastic,this hand tool is designed so you canremove old caulk with one end and apply fresh caulk with the other. Start with the beveled blades to quickly shave away old caulking from the sides of a seam; the sharp point can dig stubborn caulking out of corners.
  3. Wipe down the trim.Once you’ve removed anyloose paint or brittle caulk,make sure your trim is free of dust and dirt that would impede paint adhesion—thisgoes forexisting trim as well asnewly installed trim. As with paint, the cleanser of choice depends on the trim type. On interior wood and MDF, as well as vinyl trim,use a household degreasing cleaner. On exterior wood,choose a cleaner that contains a mildewcide to protect the woodagainst potentialmold and mildew growth from exposure to moisture. On metal trim,work with a rust-removing cleanser.
  4. Sand trim smooth. No matter the type of trim, if it’s been painted once before, start with a150-grit sandpaper to smooth awayany edges where that old layer of paint flaked to reveal the bare surface. Then, switch to 220-grit sandpaper to fine-tune the surface. If you’re paintingunfinished new trim, use only the 220-grit sandpaper to scuff the trim enough for the paint to adhere.
  5. Apply new caulk to the exposed seams.For caulking to efficiently seal the seams and gaps in window trim, it needs to be applied and smoothed into the crack. To achieve aprofessional-looking finish, run a bead of caulk in the seam (1/8 inch is usually sufficient) and then use the flexible padded tip on the Caulk Aid(on the end opposite its scraper) to smooth out the bead. The tool makes it simple: Start at one end of a seam and, with gentle pressure, pull the Caulk Aid to the other end. If caulk builds up under the padded tip, just wipe it clean on a rag and continue to the end of the seam.

So, You Want to… Paint Your Window Trim (4)



It’s time to paint! For unfinished trim, you’ll need to apply a coat of primer before thepaint, using thefollowing method for each application. For previously painted trim, you can start with your first coat of paint.

Instead of taping off the trim to protect the wall, save some time without sacrificing clean lines by using the 11-½-inch Mini Guide™ Paint Shield & Smoothing Toolfrom Hyde Tools. Just press the paint shield’s stainless steel blade into the crease between the trim and wall as you brush on the paint to prevent splatter and smudges. After you’vepainted 11 inches or so of trim, lift the paint shield away and wipe its blade on a rag before repositioning it along the next section of window trim.

Don't want to do it yourself?

Get free, no-commitment estimates from pro painters near you.

So, You Want to… Paint Your Window Trim (5)


So, You Want to… Paint Your Window Trim (6)

For the best results on narrow strips of trim, opt for a small angled paintbrushlikeone from Richard Tools’ Mini Master Angular Touch Seriesinstead of a flat paintbrush, which is more suitable for cutting in onlarge areas. Brushes in the Mini Master Series run from 1½ to 2½ inches in width—the perfect size for painting trim. Plus, this line is suitable for use with all types of paint, and the brushes’soft-grip handles make them easy to hold.

Apply one to two coats for a durable finish, making sure you wait the proper amount of time before applying the next coat. You can find the recommended drying times on the paint can. As you’re working, you may end upgetting paint on thewindowpanes. Don’t worry! We’ll show you how to remove overpaint from glass in the next section.

So, You Want to… Paint Your Window Trim (7)



After the final coat of paint dries completely, assess your work. Any overpaint or splatters seen on the windowpanes willdetract from the appearance of the fresh coat, so you’ll want to clean those up. Luckily, even if dried, paint can easily be scraped from the glass with the right tools.

Position the stainless steel blade of the Mini Guide Paint Shieldalong the edge of the window pane, where the glass meets the painted trim. Cut along the outer edge of the Mini Guide with the9mm Snap-Off Blade Utility Knife. (Choosing a utility knife with snap-off blades ensures that you will always have a super-sharp blade to make the cleanest cut.) The cut line you make now will provide a clear, crisp, and straight line toward which you can scrape away theexcess paint.

After you’ve made this target line, use a glass razor scraper like Hyde Tools’ Glass Scraper with 5 Blades Stored in Handle to remove the paint from the windowpane. Position the blade parallel to the edge of the trim and, using a straight motion, scrape the stuck-on paint right off the glass. The scraper features an ergonomic design to reduce hand fatigue when scraping and, as the name suggests, a ready supply of replacement blades in the handle in case you need to change oneout on the job. With this trustytool in hand, you’ll have sparkling clean glass without a trace of straypaint.

Don't want to do it yourself?

Get free, no-commitment estimates from pro painters near you.

So, You Want to… Paint Your Window Trim (8)


So, You Want to… Paint Your Window Trim (9)

Top Articles
Latest Posts
Article information

Author: Melvina Ondricka

Last Updated: 02/06/2023

Views: 5732

Rating: 4.8 / 5 (68 voted)

Reviews: 83% of readers found this page helpful

Author information

Name: Melvina Ondricka

Birthday: 2000-12-23

Address: Suite 382 139 Shaniqua Locks, Paulaborough, UT 90498

Phone: +636383657021

Job: Dynamic Government Specialist

Hobby: Kite flying, Watching movies, Knitting, Model building, Reading, Wood carving, Paintball

Introduction: My name is Melvina Ondricka, I am a helpful, fancy, friendly, innocent, outstanding, courageous, thoughtful person who loves writing and wants to share my knowledge and understanding with you.